Troubleshooting speed issues on iOS

If you are experiencing slow speeds while connected to VyprVPN on an iOS device, we recommend following the steps below.

Perform a complete refresh of your network:

  1. Shut down your router
  2. Shut down your modem
  3. Wait 30 seconds, then power on your modem again
  4. Wait until your modem has booted, then power on your router
*If you are on a cellular network, place your phone in airplane mode, wait 30 seconds, then disable airplane mode.

Try alternative protocols:

The VyprVPN iOS app only supports the IKEv2 protocol.  You can try other protocols by connecting manually using the instructions outlined in these articles:

VyprVPN L2TP/IPsec VPN Setup for iOS 7+

VyprVPN OpenVPN App for iOS 7+

Select the fastest server option, or choose a server with low ping from the server list:

Serverlist1.pngServerlist2.png

  1. Tap the pindrop icon next to the connect button
  2. Choose fastest server towards the top, or select another server with green ping
Note: If you require to connect to a specific server, please note that factors including the ping time to the server, the geographical distance between your physical location and the server location, and the protocol you are connecting to the VPN server affects the speeds you will receive.

While VyprVPN is configured to minimize the amount of speed loss when connected, we unfortunately cannot guarantee that you will not experience loss of speeds even after attempting the above troubleshooting. There are many factors outside of our control affecting your speeds, including the route your ISP provides you to our VPN servers.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request